(A)-KT-1414-09.
New KT-1414-09 3-4 Axis Steppers Travel of (Y)14" x (X)14" x (Z)5.5" (Version 2009, Launching April 09) (Shaft linear motion, steppers -upgrade to servo optional)
The new KT-1414-09 has 20mm shafts, antibacklash nuts, wider 19 inch material capacity. Use the accurate machine to cut thin aluminum, plastics, and wood. The anti-backlash nut and the .100" pitch leadscrews provide very accurate resolutions and is great for fine inlay work. The pitch and high torque combo also provides great mechanical advantage when cutting hard woods and have been tested to cut .375" deep, at 70IPM, with a .375" diameter bit. The frame is comparable with Nema 23 motors or K2 servo motors. With the right approach in your toolpaths, spindle, bits, accessories you can achieve results in milling that once required a $50,000 and more cnc machines. With the KT1414-09 you now can do this in your own garage, business, or anywhere with 110V outlet.
Features:
See upfront prices online. Scroll to bottom.
Applications: MDF, Maple, Balsa, Corian, Circuit Board, Hard Wood, Plastic, non ferrous metals. Special misting, tools, proper feed rate, proper technique required if used to cut aluminum.
Assembly of Machine: At K2, we test the controller and tolerance prior to shipping out. It is important that our customers get up and running as soon as possible. Machine is assembled to 99% unless otherwise instructed by customer.
Machine Warranty: One year on parts based on an 8 hours per day, 7 days per week operation. One year on labor at K2CNC location.
Support: Email - unlimited. Phone - one basic set up - unlimited. K2 site - basic mach 3 up to 4 hours. Visualmill - basic understanding up to 1 hour.
Crating and Handling: All machines are crated in a wooden pallet and is enclosed with plywood, 2x2 and 2x4. This ensures that your machine will ge there in one piece. All machines are insured.
USA Shipping Estimates: UPS-SCS
World Wide Shipping Estimates: UPS-SCS