Back to K2 Machines

  

KG-5050-EB.
KG-5050-EB

Overview of features of the KG-5050


Footprint without motor:
  • Footprint (overall size not including motors): 66" x 61" x 21"
Dimensions with motor:
  • Footprint (overall size not including motors):X=70" x Y=61" x 27". Dimensions may change without notice.
Travel or Cutting dimension:
  • Travel: X-50" Y-50" (Z-5" to 12")
Table Top:
  • Travel: X-54" Y-48"
Frame Features:
  • Structure is CNC machined 6061 aluminum
  • Aluminum Extrusions
  • 6061 Billet Machined Aluminum
  • Precision Ground Aluminum 6061 on critical parts.
  • X and Y Axis uses 20mm ABBA Linear Rails and Blocks (4 Blocks for X and 2 for Y) 
  • Feet included a plate for attaching to your table(10-32 Screw thru hole).

Ball Screw X and Y. X has 2 ballscrews on the side of the frame.
  • Backlash Tolerance of +-.001 inch.
  • Repeatability of +-.001 inch.
  • Resolution is .0001 inch.
  • Rapid Traverse is 300 inches per minute.
  • Feed rate is dependent on the materail.
  • X uses close loop servo motors. 2:1 Ratio Pulley with reinforced belts.
  • Y uses close loop servo motors. 2:1 Ratio Pulley with reinforced belts.
  • Custom feed rate is availbie upon request. Please call us and ask for Kevin
INCHES METRIC
DECIMAL mm
.00025" .00635mm
.00050" .0127mm
.001" .0254mm
.003" .0762mm
.006" .1524mm

 
Z Axis-Linear Rail System.
  • Linear Rigid Rails with recirculation ball bearings.
  • Ballscrews .001 backlash tolerance.
  • Resolution is .0001 inch.
  • 2:1 Ratio pulley and reinforced belt.
  • Linear Bearings
3 axis Linear Rail System.
This is on both the rack and pinion and the ballscrew models.
  • Most Accurate Cutting Z Axis
  • Heavy load
  • Sealed
  • Longer Lasting
  • High rigidity
  • Low axis motion noise
  • High durability
  • Low maintenance
Cable Carriers
  • Easy to snap in additional wires.
  • Add your extension cord for your spindle.
Connectors that comes with controller:
  • Parallel Printer Cable for controls (Currently No USB)
  • USB for Power
  • Power Cord for 110 V AC
Cut Capacity/Material:
  • Most non-ferrus meterials.
  • Corian
  • Plastic
  • Foam
  • Wood
  • Circuit Board
  • Light Aluminum
Assembly:
  • Est of 40-120 min with two people.
  • Wires pre-installed
On a turn-key machine these are the options that you may need as items to make your first cut. These items are NOT included or available thru K2CNC.
  • Vacuum Table - Not available thru K2
  • A vise or Fixture to hold part - Not available thru K2
  • Your Cutting Program - Not available thru K2
  • Cutting Tool is optional and some size are aviliable.
Support includes:
  • Email (Unlimited)
  • Phone (2 hours assembly/controller)
  • Controller software support (Email from Mach2)
  • CAD Support (Email, Phone, Fax from VisualMill or ARtcam)
  • On site support is available at an additional charge.
Warranty:
  • 12 Months on all parts that are defective.
Returns:
  • 15 days to return machine. Motors and controller can be used but not damaged. 100% Money Back on machine, motors and controller less Shipping and handling.

KG-5050 Option Details:
 YOU CAN CUSTOMIZE YOUR MACHINE.

Dell Computer, VisualMill and Mach 2 Details:
 
Z Axis Details:
  • 5" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 5" (Recommended).
  • 8" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 8".
  • 12" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 12".
Limit Switches Details:
  • Used for Homing, Zeroing X, Y and Z.
  • Pre-Wired
  • Made of micro switches
Spindle Router Details:
  • Porter Cable 892 - 2.25HP - NEW Tool Changing easier than Hitachi (Single Tool Changer)
  • NEW* Bosch - 2.25hp - 1617 motor (3.5in diameter) - Please make verbal or email request for this model.
  • Hitachi 2.25 HP
  • Makita 2.25 HP
Spindle Dust hood Details:
  • Collects dust and small chips.
  • Fits 2.25" diameter hose.
  • Vacuum and Hoses are NOT included
  • Collects approximately 80% of cut debris
Jet Brand dust collection system
  • 650 CFM
  • 1150 CFM
Table Top Details:
  • Aluminum Table top size: 58" x 48" x .1875" - 1/4-20 Tap every 3 inches
  • Wood Table top size: 58" x 48" - Recommended 2 ply of .75" thick High density MDF- 2 T-Slot rails made of Aluminum (Not available)
  • 7/31/06 - Currently working on low leakage vacuum for mdf and plasic applications.
Cable Carriers on X and Y Axis:
  • Allow for motor wires, limit switches and encoder wires.
  • Keep the wire neat and out of the way.
Table Frame Legs:(Welded legs are at an additional charge.)
  • Welded steel (2" x 2" square tubing)
  • Painted Gray.
  • Adjustments on feet.
  • Additional charges for Shipping
Shipping and Handling:
  • Requires Pallet Delivery
  • Typical Company: UPS (United Parcel Services) Residential or Business. Delivery to the door.
  • Pallet is made of 11/32" thick plywood and 2x2 wood brace framing.
  • Additional charges may apply for residential delivery
  • Forklift is required to unload from delivery truck.
  • Total weight is approx. 350 LBS
  • Customer is responsible for removing box from delivery truck
  • International Shipping is available at additional charges - Please call for details.

Servo Controller:
Z Axis:
Spindle Router Choices:
Spindle Router and Mount:
Table Top:
Software_CAD (designing & drawing):
Software CAM (Tool paths control) - G-Code Generator:
Software_Control (Controls the Machine):
Table Frame "Legs":
Dust Hood:
VectorArt3D:
Shipping & Handling:
Acknowledgement:
Running Specials:

  Price: $7,240.00
Please Call
662-256-8333