Back to K2 Machines

  

KG-5050-PR-Rack&Pinion.
KG-5050-PR-Rack&Pinion

 
Machine Features :
  • Frame - Linear Rails and Bearing blocks
  • Welded Legs
  • 3 Servo motors 305 oz/in with encoder.
  • 3 axis servo controller **optional 4th axis at additional cost.
  • Mach 2 or Mach 3 control software.
  • Cable suspension bar
Not included in Price: Items may be added at additional cost.
  • CAD
  • CAM
  • Computer
  • Bits
  • Table Top - You may use wood
Footprint without motor:
  • Footprint (overall size not including motors): 66" x 61" x 21"
Dimensions with motor:
  • Footprint (overall size not including motors):X=70" x Y=61" x 27". Dimensions may change without notice.
Travel or Cutting dimension:
  • Travel: X-50" Y-50" (Z-5")
Table Top:
  • Area: X-54" Y-48"
Frame Features:
  • Rack and pinion motion.
  • Structure is CNC machined 6061 aluminum and extrusions
  • 6061 Billet Machined Aluminum Parts
  • Linear motion sides uses 20mm ABBA Linear Rails and Blocks (2 Blocks)
  • Gantry uses one 20mm ABBA Linear Rails and Block.
  • Feet included a plate for attaching to your table(10-32 Screw thru hole).

Rack and Pinion X and Y
(This is the Standard Option):
  • Tolerance of .006
  • Repeatability of .006
  • Rapid Traverse is 500 inches per minute.
  • Feed rate is 250 inches per minute.
  • Custom feed rate is available upon request. Please call us and ask for Kevin.
  • Gear ratio is 4:1
  • Gear material is aluminum and steel.
Z Axis.
  • Linear Hardened Shaft Guides
  • Linear Bearings Blocks with grease inlet.
  • Rolled Ballscrews .001 Backlash.
  • Recuirulating ball nut with grease inlet.
  • Belt Drive geared down for power and accuracy.
  • 5" Travel
  • Standard X and Y Axis uses 20mm ABBA Brand linear rails/blocks
3 axis Linear Rail System.
This is on both the rack and pinion and the ballscrew models.
  • Most Accurate Cutting Z Axis
  • Heavy load
  • Sealed
  • Longer Lasting
  • High rigidity
  • Low axis motion noise
  • High durability
  • Low maintenance
Connectors that comes with controller:
  • Parallel Printer Cable for controls (Currently No USB)
  • USB for Power
  • Power Cord for 110 V AC
  • International Power Cord for 220 VAC (Please request)
Cut Capacity/Material:
  • Plastic
  • Foam
  • Wood
  • Circuit Board
  • Light Aluminum
Assembly:
  • The machine is pre assembled to 100% tested and disassembled to95%.
  • Est of 40-120 min with two people.
On a turn-key machine these are the options that you may need as items to make your first cut. These items are NOT included or available thru K2CNC.
  • A vise or Fixture to hold part - Not available thru K2
  • Your Cutting Program - Not available thru K2
  • Plasma Cutter.
Support includes:
  • Email (Unlimited)
  • Phone (2 hours assembly/controller)
  • CAM support (Email from Mach2)
  • CAD Support (Email, Phone, Fax from Visual)
  • On site support is available at an additional charge.
Plasma features:
  • Motion system location is off to the side and makes plasma cutting possible by removing the brace and anchoring the frame to your welded frame.
  • Must state that you are planning on using the machine for plasma. Additional brackets may be needed for your application.
  • *Plasma cutter, jigs, ribs plasma cutters are not provided by K2.
  • Plasma Mounts are available.
  • Motion system location make plasma cutting possible with added options.
Warranty:
  • 12 Months on all parts that are defective.
Returns:
  • 15 days to return machine. Motors and controller can be used but not damaged. 100% Money Back on machine, motors and controller less Shipping and handling.

KG-5050P Option/Details:
Z Axis Details:
  • 5" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 5" (Recommended).
Limit Switches Details:
  • Used for Homing, Zeroing X, Y and Z.
  • Pre-Wired
  • Made of micro switches
Servo Controller Details:
  • 3 to 4 Servo Motors with feedback encoders.
  • Geckodrive G320 servo controller
  • Wired for Step/Dir signals from Printer Port
  • Fully enclosed control box and pre wired for Parallel Interface
  • Watts power supply. 24VDC unregulated (~30V) 8 Amps.
  • 5 watt power input wire from computer USB port.
  • Enable button
  • Power Plug
  • Fuse
  • Mach 2 Controller software settings CD with purchase or download demo from Mach 2 site.
  • Mach 2 Set Up assistance is from K2 CNC with purchase
  • Support is from Mach 2 via email or from K2.
Servo Motors:

X and Y Axis

Z Axis

  • 2 Servo Motors DC  X and Y
  • Strength - 305 oz/in torque
  • US Digital Encoder for Servos.
  • Servo Motors DC  X and Y
  • Strength - 305 oz/in torque
  • US Digital Encoder for Servos.
Table Frame Legs:(Welded legs are a part of this machine and are included)
  • Welded steel (Mainly 2" x 2" square tubing)
  • Powder coated gray.
  • Adjustments on feet.
Shipping and Handling:
  • Requires Pallet Delivery
  • Typical Company: UPS (United Parcel Services) Residential or Business. Delivery to the door.
  • Pallet is made of 11/32" thick plywood and 2x2 wood brace framing.
  • Additional charges may apply for residential delivery
  • Forklift is required to unload from delivery truck.
  • Total weight is approximate. 350 LBS
  • Customer is responsible for removing box from delivery truck
  • International Shipping is available at additional charges - Please call for details.

Servo Controller:
Software_CAD (designing & drawing):
Software CAM (Tool paths control) - G-Code Generator:
Software_Control (Controls the Machine):
Spindle Router Choices:
Router Mounts (3925 and smaller):
Dust Hood:
TOOL BITS:
DA300:
Shipping & Handling:
Acknowledgement:

  Price: $3,900.00
Please Call
662-256-8333